The Panasonic IP-Enabled KX-TDA series business telephony solution combines advantages of traditional telecommunications together with the convergence of IP technology-offering advanced features and flexibility to handle your company communication needs.
Installing KX-TDA Maintenance Console 1. Copy the KX-TDA Maintenance Console setup file to a local drive on the PC. (Its icon is shown here, on the left.) 2. Double-click the setup file to run the installer. Follow the on-screen instructions provided by the installation wizard. Click [Finish]. Notes • To install or uninstall the software on a PC running Windows 2000 Professional or Windows XP Professional, you must be logged in as a user which is in either the 'Administrators' or 'Power Users' group.
• When the PBX is first connected to the PC via USB, a wizard should appear and ask you to select the appropriate USB driver. Browse for and select the KX-TDA USB driver, which is copied to the local drive during installation. Starting KX-TDA Maintenance Console Note The screenshots shown here are for reference only, and may differ from the screens displayed on your PC. Click ' Start' ' Programs' ' KX-TDA Maintenance Console' ' KX-TDA Maintenance Console'.
Vengeance producer suite hack. Enter a valid programmer code ( INSTALLER, ADMIN, or USER), then click [OK]. Note When starting KX-TDA Maintenance Console for the first time (i.e., either when the PBX is still set to the factory default settings, or after initializing the PBX), Quick Setup can be launched automatically by entering the Installer Level Programmer Code and password.
Click ' Connect' ' USB' from the menu bar. Note To connect to the PBX via USB, the KX-TDA USB driver must be installed on the PC, as explained above in 'Installing KX-TDA Maintenance Console'. Enter the password appropriate to the programmer code entered in Step 2 and click [OK]. Note The password for each programmer code is 1234 by default. Follow the Quick Setup instructions if starting KX-TDA Maintenance Console for the first time, otherwise, proceed to the next step. The program menu appears. You may now begin programming the PBX.
Notes • During long programming sessions, it is highly recommended that you periodically save the system data to the SD Memory Card. If the PBX suffers a sudden power failure or if the system is reset for some reason and all system data is lost, it can be restored from the SD Memory Card.
To save the system data to the SD Memory Card, either click the ' SD Memory Backup' icon, or exit KX-TDA Maintenance Console and click 'Yes' to save when prompted. • When programming PBX data which can be displayed on a proprietary telephone (PT) (extension names, group names, System Speed Dialing names, etc.), it is possible to enter characters which cannot be displayed on a KX-T7600 series PT. Characters which can be displayed on a KX-T7600 series PT are shown below in the white cells. • Software features, design, and system requirements are subject to change. CAUTION Do not remove the SD Memory Card while it is being accessed. Doing so will corrupt the system data and possibly damage the SD Memory Card.
Thank you Joe and Johnny for your replies. This was a used PBX at a good price that I am installing at our church. It does have a the LCOT card but don't recall right now if it is an 8 or 16, I would have to look at the unit. I do have the maintenance software to program the PBX and the voicemail systems.
The lines coming in are phone lines from Charter. They are basically POTS lines in a hunt group. I can plug an analog phone into the incoming lines and see the caller ID information. But when I plug the lines into the PBX the caller id information is not coming to the phones.
Caller ID for intercom calls works just fine.